Summary of the FL3DMS Presentation at the CFIHOS Face-to-Face Meeting 2026

Standardised information improves engineering, procurement and construction efficiency, while producing the key data required for commissioning and operations as a by-product. A proof of concept, demonstrated at the CFIHOS F2F meeting, shows how data standardisation can deliver measurable value for owner operators, engineering contractors, and software vendors alike. 

Development of key engineering deliverables enabled by set of aligned data standards 

After several years of collaboration between industry experts and standards communities, the alignment of four key engineering standards is reaching an important stage. At the CFIHOS PAU26 conference, held from 26–29 October 2026, a joint demonstration showed how FL3DMS, DEXPI, CFIHOS and CII Advanced Work Packaging (AWP) can work together to improve the flow of engineering information across project phases.  

The significance lies in the alignment of these standards, which govern four key engineering deliverables of a capital project. Each standard addresses a specific part of the engineering lifecycle. Their combined use enable the output from one step to be used as input to the next without the need to recreate, reconcile and manually transfer information between disciplines, systems and project phases. 

Four standards, one connected engineering process 

The demonstration brought together four complementary and aligned standards: 

  • Front End Engineering: Data Exchange in the Process Industry (DEXPI) supports the creation and exchange of structured 2D Process and Instrumentation Diagrams (P&IDs), including tags, piping, properties and plant topology. 
  • Detailed Design: Facility Lifecycle 3D Model Standard (FL3DMS) defines requirements for the content, configuration, delivery and lifecycle management of 3D models based on the P&IDs. 
  • Construction: Advanced Work Packaging (AWP) supports construction planning (4D) and execution (5D) based on the project schduel and work packages defined in the 3D Model. 
  • Commissionong and Handover: The Capital Facilities Information Handover Specification (CFIHOS) defines requirements and structure for engineering and asset information exchange, integration and handover. 

The alignment allows information created by each engineering discipline to be reused in subsequent project phases.  It also allows generation of handover information in the right format at source.  

The alignment is enabled via common data structures and terminology in all the standards. For example, FL3DMS uses DEXPI and CFIHOS classes in its 3D Model Content Requirements Matrix, incorporates CFIHOS and CII AWP entities and properties in its Data Model and Dictionary, and uses CFIHOS discipline and document types in its Deliverables List. 

Demonstrating interoperability in practice 

To demonstrate the potential of this alignment, the contributing teams developed a small engineering project using data from a DEXPI-based P&ID to develop an FL3DMS-compliant 3D model, which in turn was used to define work packages and a 4D path of construction.  The data generated was also used to populate several handover deliverables. 

Key engineering The demonstration showed how consistent engineering information could support: 

  • Automated consistency checks between P&ID and 3D model information, verifying consistent topology but identifying an additional valve and inconsistent piping specifications. 
  • Automated generation of engineering deliverables, including 11 fabrication isometrics. 
  • Definition of construction work packages and a 4D construction plan using 3D model data. 
  • Generation of 14 CFIHOS-compliant handover…

Wood joins USPI and FL3DMS

About Ben Martin:

Ben Martin is the Digital Sustain Lead with 20 years industry experience and a strong focus on digital asset data, and the long term sustainability of engineering information across the asset lifecycle. He works closely with engineering, operations, and digital teams to improve data quality, governance, and the accessibility of critical information. Ben is passionate about driving practical digital transformation, enabling better decision-making through structured and trusted data. His work supports the adoption of industry standards and collaborative approaches that deliver greater value for clients and asset owners.

Why Wood is Joining USPI and FL3DMS

Wood is a global consulting and engineering company that delivers solutions across energy, materials, minerals, and industrial markets. As digitalisation continues to transform the industry, effective management and exchange of engineering information has become increasingly important.

Wood has joined USPI and is participating in FL3DMS to help shape the future of open, interoperable information standards for engineering and asset lifecycle data. Collaboration through FL3DMS supports Wood’s commitment to improving data consistency, reducing information handover challenges, and enabling more efficient digital delivery for clients. By working alongside industry partners, Wood aims to help drive innovation and accelerate the adoption of standards that improve the quality, usability, and longevity of engineering information.

New USPI report published: lessons learned from IM-LCF Workshop Series 1

USPI has published the first report from the Information Management in Large Capital Facilities project, or IM-LCF.

The report, IM-LCF Project Report on Series 1, presents the findings and lessons learned from the first IM-LCF workshop series. This series examined how organisations can use ISO 15926-11 and a Common Data Environment to improve the integration and management of information throughout the lifecycle of a large capital facility.

Addressing fragmentation in large capital projects

Large capital projects involve many organisations, disciplines, systems and lifecycle stages. Project information is therefore often fragmented across separate tools, data structures and organisational boundaries.

The report explains how this fragmentation affects the consistency, traceability and reuse of information. It considers both organisational fragmentation between project partners and fragmentation over time between requirements, design, construction, operations and maintenance.

Workshop Series 1 focused on the role of a data-centric Common Data Environment in addressing these challenges.

Main topics covered

The report discusses:

  • the practical role of a Common Data Environment;
  • the use of ISO 15926-11 for structured and connected lifecycle information;
  • information architectures, project ontologies and reference data;
  • integration of documents, engineering data and graphical models;
  • information maturity and organisational readiness;
  • data quality requirements;
  • governance, responsibilities and management support;
  • limitations in existing software tools; and
  • lessons learned from participating organisations.

The report does not prescribe a single implementation method. Instead, it provides practical guidance, recommendations, templates and considerations that organisations can adapt to their own project context.

Practical guidance for industry

The publication is intended for owner operators, EPC contractors, engineering companies, suppliers, software providers, consultants and information-management professionals involved in large capital facility projects.

It can help organisations:

  • define realistic information-management ambitions;
  • identify organisational and technical barriers;
  • improve data quality and integration;
  • strengthen collaboration between engineering, information-management and IT functions;
  • evaluate the use of international standards; and
  • make better-informed decisions about Common Data Environment implementation.

The report was prepared by the USPI IM-LCF project team with contributions from specialists representing several organisations in the process and energy industries.

Part of the wider IM-LCF programme

Workshop Series 1 is the first part of a four-series programme.

Workshop Series 2 addressed the cleansing and integration of engineering and supplier data. Workshop Series 3, on Information Maturity Assessment, is currently in progress. Workshop Series 4 will focus on defining the capabilities that software tools should provide to support standards-based information management in integrated project environments.

USPI will publish separate reports on the findings from the other workshop series.

Publication details

Title: IM-LCF Project Report on Series 1
Publication number: I-RE1-001 IM-LCF S1
Publication date: 1 July 2026

Organisations interested in IM-LCF or future workshop activities are invited to contact USPI at stichting@uspi.nl.

USPI Annual / MB Meeting – Thursday 23 April 2026

Dear USPI Member and interested expert , 

Please reserve Thursday 23 April 2026 in your agenda for the USPI Management Board Meeting and the Annual Meeting hosted at the McDermott offices in The Hague, The Netherlands.

Key Speaker highlight| Frank van Ewijk 

We are pleased to announce that Frank van Ewijk, Director Programmes at IOGP, will be delivering a keynote industry presentation 

during the Annual Meeting. His session will provide insights into: 

• Key focus areas for Owner Operators 

• Major IOGP programmes including JIP33 

• The role of standardisation and data in enabling these programmes 

Purpose of the meeting 

During the meeting we will: 

• Present the USPI results from 2025 and the Business Plan for 2026 

• Share updates on current USPI projects and ISO activities 

• Learn from peers about their journey with implementing data-interoperability standards 

• Engage in valuable networking with industry colleagues 

Agenda Highlights 

• 13:30 Management Board Meeting (only for USPI members) 

• 14:00 Annual Meeting (Open): 

• FL3DMS Face-to-Face read-out 

• Project presentations (Tagging and Coding, IM-LCF) 

• Update ISO activities 

• Data Standards Quiz 

• Key industry presentation by Frank van Ewijk 

• Summary, actions, and closure 

• 16:30 Drinks and networking 

Logistics 

The venue is easily reachable by public transport. 

Click here to see more information about the logistics. 

Address 

Haagse Poort Prinses Beatrixlaan 35 2595 AK, The Hague,NL Tel +3170 373 2010 


Join us! 

If you wish to participate, please register here

Please note that, for access to the McDermott office building, all participants are kindly requested to bring a valid form of identification (passport or national ID card). Identification must be presented at reception upon arrival. 


We look forward to welcoming you in The Hague and collaborating with you on another impactful year for our industry. 
Kind regards, USPI Executive Committee 

Stichting USPI-NL

3817CH , Amersfoort The Netherlands 

E-mail:stichting@uspi.nl

FL3DMS & USPI Annual MB FTF Meeting (21–23 April 2026)

Great to look back on an inspiring and productive week in The Hague!
A big thank you to everyone who joined the FL3DMS Face-to-Face Meeting (21–23 April 2026) and the USPI Annual & Management Board Meeting (23 April 2026).
Over the past days, we had the opportunity to:
✔️ Share insights and progress on FL3DMS and related initiatives
✔️ Align on strategy and future roadmap
✔️ Exchange knowledge across the industry
✔️ Strengthen collaboration within the USPI network

A special thank you to McDermott International, Ltd for hosting us and providing such a great venue for collaboration and discussion.
The sessions, discussions, and energy in the room truly highlighted the importance of working together on standards, interoperability, and data-driven transformation across our industry.

Many thanks as well to all speakers, contributors, and organizers for making this such a valuable and engaging event — and to all participants for your active involvement and openness.

Looking forward to continuing this momentum and seeing you at the next sessions!
hashtag#FL3DMS hashtag#USPI hashtag#DigitalTransformation hashtag#Engineering hashtag#Data hashtag#Collaboration hashtag#Standards hashtag#TheHague hashtag#McDermott

USPI Chairman’s Letter 2026


We are pleased to share our annual update on USPI’s activities and strategic initiatives for 2026, as outlined in the attached letter from USPI Chairman Hugo Belder. In this update, you will find an overview of key achievements, ongoing industry collaborations, and the strategic priorities that will guide USPI and its members in the coming year.

The letter highlights our continued focus on standardization, digital transformation, and strengthening cooperation across the process and energy industries.

We invite you to read the full message to stay informed about USPI’s direction, upcoming initiatives, and opportunities for member engagement.

Join the FL3DMS FTF Meeting | 21–23 April 2026 | The Hague

We are pleased to announce that the next FL3DMS Face-to-Face (FTF) Meeting will take place on 21–23 April 2026 at the offices of McDermott in The Hague, Netherlands. 

Preliminary Agenda 
(A detailed agenda and preparatory materials will be shared in advance.) 

  • CATS & Specs — advancing interoperability and standards 
  • Reality Capture — Documenting best practices for specific use cases 
  • Roadmap — strategic planning and future direction 

This meeting will provide an opportunity to: 

  • Strengthen the FL3DMS standard and collective roadmap 
  • Align at a strategic level 
  • Share insights on the latest industry developments 
  • Foster collaboration across the USPI–FL3DMS network 

Participation 

  • Free of charge for FL3DMS members 
  • Non-members are welcome to attend for a participation fee of €500 p.p.  

We encourage interested professionals and organizations who are not yet FL3DMS members to join and engage with the initiative. 

Meeting Details 

Date: 21–23 April 2026 
Location: McDermott Offices 
Pr. Beatrixlaan 35 
2595 AK The Hague 
The Netherlands 

Action Required 

To confirm your participation: 

  1. Complete the registration registration form:

If you are unable to attend, please designate a colleague to represent your organization. 

Should you wish more information, please contact: hugo.belder@uspi.nl

We look forward to welcoming you in The Hague and continuing to drive the future of FL3DMS together. 

USPI Chairman’s Letter 2026

We are pleased to share our annual update on USPI’s activities and strategic initiatives for 2026, as outlined in the attached letter from USPI Chairman Hugo Belder.In this update, you will find an overview of key achievements, ongoing industry collaborations, and the strategic priorities that will guide USPI and its members in the coming year. The letter highlights our continued focus on standardization, digital transformation, and strengthening cooperation across the process and energy industries.

We invite you to read the full message to stay informed about USPI’s direction, upcoming initiatives, and opportunities for member engagement.

Read the Chairman’s Letter 2026 Here:

FL3DMS Release 1.3 is here!

We’ve taken a big leap forward to help you unlock the full potential of your 3D models – smarter, more consistent, and easier to apply across every project.

What’s New?

  • As-Built Options – Three clear strategies for cost-effective as-building
  • Vendor Package & Skid Requirements – Standardized data delivery from suppliers
  • Updated Content Matrix – Expanded requirements + NORSOK Z-020 mapping + CFIHOS mapping
  • Engineering Deliverables List – Linked to CFIHOS for clarity and alignment
  • Data Model & Dictionary – Consistent definitions and relationships across all elements and aligned with CFIHOS and CII AWP
  • Implementation Guide & Checklists – Practical steps for owners, EPCs, and suppliers

This release is a game-changer for structured, interoperable project data.

More detailed information on the changes can be found in the release notes which can be found in the downloads.

Download the FL3DMS standard here:

Hans Teijgeler Receives Royal Decoration for Pioneering Work in Engineering Information Standardization

On December 11, 2025, Hans Teijgeler was honored with a Royal Decoration Ridder in de orde van Oranje-Nassau during a ceremony at the Council Chamber of Bergen (NH), The Netherlands. This recognition celebrates his outstanding contributions to standardization of engineering information and data within the process industry supply chain, a field in which he has been a driving force for more than three decades. 

Through his work at the Engineering Contractor Fluor which is a member of the association USPI, and his participation in projects under ISO TC 184/SC 4 (Industrial data), Hans played a pivotal role in developing ISO 15926, an internationally recognized standard series that enables Integration and exchange of information and data across the process industry supply chain—independent of specific software systems. His efforts have significantly improved the quality and consistency of engineering information in the process industries, and addresses growing demands for safety, environmental compliance, efficiency, and speed to market. 

Despite limited resources and a shrinking pool of engineering experts over the past decades, Hans’s commitment and expertise have resulted in a robust, theoretically sound, international standard that can be adopted in practice which we see happening in several companies. Based on learnings from this, a second edition is being developed in ISO TC 184/SC 4/WG 3.  

The decoration was presented by the mayor of Bergen with some 40 people from family, friends, and USPI colleagues, present. He explained the depth and the meaning of the Royal Decoration given. Paul van Exel, Director ISO standardization of USPI, expressed the admiration and pride of Hans, as felt within USPI and across the global process industry. Peter Paul Pruijn, a colleague from Fluor, shared the company’s perspective and his personal feelings of respect and appreciation.  

The Dutch Chancellery’s decision to award Hans Teijgeler a Royal Decoration underscores the lasting impact of his work and his dedication to advancing industry-wide collaboration and innovation.

New FL3DMS and USPI Member DMS as per Sep 2025

As of Sep 2025, DMS has officially joined USPI & FL3DMS as a member. We are pleased to welcome Yi Sun , who will represent DMS on the USPI Management Board (MB) and will actively contribute to the FL3DMS project’s in-depth discussions. We look forward to a successful and productive collaboration.

YI SUN, a 34-year chemical engineering expert, served as Engineering & Project Manager for global EPC projects at CHENGDA, BASF & DMS, leading process design, execution & delivery of chemical plants. Proficient in engineering software, managed cross-border teams, delivered international project. Now Chief Engineer at DMS, driving global engineering excellence and business growth..

DMS is a provider of digital twin and engineering data management solutions for the energy and process industries. We specialize in helping owners and EPCs achieve seamless data handover and efficient lifecycle information management. We joined FL3DMS to contribute to and align with open international standards for 3D model data exchange. We aim to help the industry reduce rework, enable model reuse, and break vendor dependency through neutral formats

http://www.dms365.com

New USPI Member Papio Consulting as per June 2025

As of 11 June 2025, Papio Consulting has officially joined USPI as a member. We are pleased to welcome Steven Jansen, who will represent Papio Consulting on the USPI Management Board (MB). We look forward to a successful and productive collaboration.

Steven Jansen is the founder and CEO of Papio Consulting with a key focus on scaling the company and firmly establishing Papio as an elite service provider for engineering data management capabilities. Previously, Steven worked at Shell in various IT/Digital roles with a focus on Information Management for Capital Projects and operating energy assets.

At Papio Consulting, we specialize in driving innovation, operational excellence, and digital transformation within the energy sector, focusing on data management foundations. With our extensive expertise and proven track record in data, digital transformation, and AI initiatives in the energy and process industry, we believe our strategic insights significantly elevate our client’s capabilities. We would like to join USPI as engineering data management is at the heart of our company and we would like to be close to the latest developments in this area.

Website: https://papioconsulting.eu/

New FL3DMS and USPI Member Twintech as per May 2025

As of May 2025, Twintech has officially joined USPI & FL3DMS as a member. We are pleased to welcome Saber Belghith, who will represent Twintech on the USPI Management Board (MB) and will actively contribute to the FL3DMS project’s in-depth discussions. We look forward to a successful and productive collaboration.

Saber Belghith is the founder and CEO of Twintech, a pioneering global EPC (engineering, procurement, construction) solution provider known for the innovative digital thread platform, Konnect xD. With a master’s degree in aerospace and experience as a seasoned private pilot, Saber brings a unique perspective to his work, blending technical expertise with a passion for aviation. Commitment to innovation extends beyond the industry, with a focus on corporate social responsibility and bridging the gap between academia and industry. A serial entrepreneur with a long-standing career in the oil and gas industry, Saber has been a member of the Construction Industry Institute since 2012 and actively participates in advisory panels with major EPCs and operators. His journey in project execution highlighted challenges such as data silos and communication gaps, which inspired him to build the Konnect xD suite of solutions. Saber’s commitment to innovation extends beyond the industry, with a focus on corporate social responsibility and bridging the gap between academia and industry.

Twintech is on a mission to address critical bottlenecks in EPC projects within the oil and gas industry through its innovative platform, Konnect xD. Trusted by global industry leaders, Konnect xD is a ‘Digital Thread Platform’ that streamlines the design, execution, and management of capital projects. Its features are trademarked to enable users (on-and-off-site) to achieve high level optimizations in Data, Business Intelligence, 3D Model, Planning and Costs Management.

New FL3DMS Member Bechtel as per May 2025

Bechtel officially joined the FL3DMS project as a member on 16 May, 2025. We are pleased to welcome Vidyadhar Jangale, who will represent Bechtel as a USPI Management Board (MB) member and actively contribute to the project’s in-depth discussions. We look forward to a productive collaboration!

Hello, my name is Vidyadhar Jangale, and I am the PD&P Design Automation Lead at Bechtel Energy in Houston. I joined Bechtel Energy in Aug 2015 as PD&P Automation Specialist and transitioned to the lead role in 2017.

Before joining Bechtel Energy, I spent 8 years at Hexagon as a SME for Smart3D. In this role, I traveled to different countries like Canada, Germany, South Korea, Japan for helping EPCs deploy Smart3D in their environment. This global experience was invaluable, as it allowed me to gain a deep understanding of different markets and cultures.

I have led my team to create several innovative and time-saving solutions, which benefit Bechtel Energy engineering as construction. I am also serving as the 3D and Visualization Technical User Forum Chair for Hexagon for last 3 years.

Driver behind Bechtel joining FL3DMS

Bechtel is formally joining the FL3DMS (Facility Lifecycle 3D Model Standard) initiative to strengthen our leadership in digital engineering and align with emerging global standards. This move is driven by several strategic priorities:

  • Industry Alignment: FL3DMS is a collaborative effort among major EPCs and owner-operators to standardize 3D modeling practices across the facility lifecycle. Participation ensures Bechtel remains aligned with evolving industry norms and CFIHOS RDLs 
  • Digital Leadership: Our involvement reinforces Bechtel’s position as a leader in automation and Smart3D innovation. It provides a platform to influence the development of standards that directly impact our design automation strategies 
  • Collaboration & Innovation: FL3DMS offers a unique opportunity to collaborate with peers in the EPC industry. This collaboration fosters innovation and accelerates the adoption of interoperable, scalable digital solutions 
  • Strategic Visibility: Bechtel’s expertise has been explicitly recognized by FL3DMS leadership. Our participation enhances our visibility and credibility in shaping the future of digital delivery

New USPI Member Myongji University as per May 2025

As of 07 May 2025, Myongji University has officially joined USPI as a member. We are pleased to welcome Professor Youngsoo Jung, who will represent Myongji University on the USPI Management Board (MB). We look forward to a successful and productive collaboration.

Prior to joining the faculty at Myongji University in 2000, Prof. Youngsoo Jung had eleven years of industry experience as a project engineer, cost engineer, and information systems manager. He has over 300 publications, including journal articles, proceedings, books, and reports. His recent efforts focus on automated life-cycle information management for power plants, factories, and capital airports.

Myongji University is a private Christian university founded in 1948 in South Korea. The College of Architecture at Myongji University (CAMU) offers the first and best accredited five-year bachelor’s degree program in Korea. One of the special research areas of the College of Architecture at Myongji University is the standardization of information for industrial facilities.

Summary of USPI Member Board & Annual Meeting 2025

On April 24, 2025, USPI members and other interested parties gathered at LyondellBasell’s Rotterdam headquarters for the USPI Member Board and to discuss critical issues surrounding data interoperability, standardization, and the challenges faced by stakeholders in the Owner/Operator and engineering, procurement, and construction (EPC) sectors. The meeting brought together representatives from major companies to share insights.

Introduction by Hugo Belder Hugo Belder opened the meeting by welcoming attendees and presenting the USPI results and business plan. He highlighted the organization’s achievements over the past year and outlined the strategic goals for the upcoming period. The introduction set the stage for a productive discussion on advancing data management and standardization within the process industry.

Two new Executive Committee members were approved by the Members Board: John Leeflang (McDermott) and Tudor Ciubotariu (TechnipEnergies).

USPI Finance by Peter Paul Pruijn

Peter Paul Pruijn provided an overview of USPI’s financial status, detailing the budget allocations, expenditures, and financial health of the organization. He emphasized the importance of financial stability in supporting USPI’s initiatives and projects, ensuring that the organization can continue to drive progress in data interoperability and standardization.

The Members Board approved the financial results for 2024 and the 2025 budget.

Read-out of FL3DMS Face-2-Face Meeting by Anders Thostrup

Anders Thostrup (USPI and Shell) provided a summary of the FL3DMS Face-2-Face Meeting held from April 22-24. He discussed the key outcomes and decisions made during the meeting, emphasizing the importance of FL3DMS in improving 3D model management and interoperability. The read-out highlighted the collaborative efforts to refine the FL3DMS standards and the next steps for implementation.

Tagging Project plan by Jan Jelle Sijbesma

Jan Jelle Sijbesma (Fluor) provided an overview of the tagging project, which aims to standardize tagging philosophy and how tagging is used and managed across different projects. He discussed the timeline for the initiative, including the development of a draft tagging philosophy, engaging potential participants, and creating implementation guidelines. The presentation emphasized the importance of consistent tagging practices to improve data quality and integration.

Presentation on Data Interoperability Standards by Frédéric Gobin 

Frédéric Gobin (Project Information and Tools Department Head Paris Operations, TechnipEnergies) shared insights on implementing multiple, complementary data standards enterprise-wide and across projects for various customers. He highlighted lessons learned from these implementations, focusing on the challenges and benefits of adopting data interoperability standards. The presentation underscored benefits achieved within the industry and the necessity for Owner/Operators and EPCs to consistently request and deploy the standards across all the projects.

Panel Discussion 

The panel discussion featured representatives from McDermott, LyondellBasell, Fluor, Hexagon, Aveva, and Shell who shared their experiences and challenges in developing and implementing data standards. Key topics included the importance of collaboration between EPCs, owner-operators, and software vendors, the need for standardized data management practices, and the role of training and competence development. The panelists emphasized the need for practical solutions and effective communication to drive improvements in data quality and integration.

The panelists were:

  • Alexis Thorne, LyondellBasell, Senior Director Global Projects Development, Strategy & JVs

Summary of FL3DMS FTF Meeting 2025

Last week, industry leaders gathered in-person for the FL3DMS Face-to-Face (FTF) meeting, hosted by USPI. Members from across the energy, engineering, and digital solutions sectors came together to refine and advance the FL3DMS standard – shaping the standard for the way 3D data is structured, shared, and handed over across the asset lifecycle. 

With representatives from TotalEnergies, Shell, McDermott, Aker Solutions, Fluor, Wood PLC, TechnipEnergies, Gizil, Hexagon, Aveva, ReVision, Mitosis Digital Technologies, xclerate and USPI’s standardization partners IOGP, Standards Norway and DEXPI,  the working group made significant progress on Release 1.3, which is scheduled for Q4 2025. 

Key focus areas included:  

  • Requirements for embedding Skid and Equipment models from vendors into the plant’s 3D model 
  • Definition of requirements for Integrity Management 
  • Enhancing the clarity and usability of As Built & Handover Requirements 
  • Establish a 3D Data model in alignment with CFIHOS and DEXPI 
  • Aligning 3D Model Engineering Deliverables with CFIHOS 
  • Developing an Implementation Guide for principals 
  • Strengthening marketing, branding, and outreach strategies for broader adoption 

Evolving FL3DMS alongside with CFIHOS, DEXPI and other standardization bodies means a continuous enablement for more efficient and intelligent project delivery and asset operations through digital transformation. 

A big thank you to everyone who contributed to the discussion, shared insights, and took ownership of the next steps. Your expertise and collaboration are what continue to drive the success of this initiative. 

Looking ahead: Keep an eye out for FL3DMS R1.3 and the Implementation Guide coming in Q4 2025. 

To download the FL3DMS-FTF 2025 presentation go Here

To download standard R 1.2 go Here

To download the FL3DMS Lifecycle guide R 1.0 go Here

Read more about the USPI 2025 Annual MB meeting…

IM-LCF invitation letter to join Workshop Series 2

Join Us for Workshop Series 2: Data Cleansing of Engineering and supplier data, starting 24 June 2025!

Dear interested experts in the field of IM applied in Large Capital Facility Projects,

We are excited to announce the second series of our four workshops on Information Management for Large Capital Facilities (IM-LCF). Following the completion of Workshop Series 1, where we had a deep dive into the fundamentals of creating a Common Data Environment (CDE) in a project, using ISO 15926-11, we are now ready to do a deep dive into: Data Cleansing of Engineering and supplier data.

Why Attend Workshop Series 2?

In IM in Large Capital Facility Projects, it is essential to create data that is unique, correct, consistent and fully integrated across all engineering disciplines. This is a difficult and complex task that required many man-hours and financial resources.

In series 1 of this project, we learned how this can be facilitated significantly by using a common data environment and how that can be created by using ISO15926-11.

In this series 2, we will now focus on the essential process of cleaning raw engineering discipline data and supplier data to ensure it is ready for integration into the CDE.

Again, the lessons learnt by Leo Van Ruijven when building the IM models for the Pallas project and in earlier Large Capital Facility Projects, are used as reference. The participants in the workshops of series 2 will bring in the lessons learnt from their projects.

The consolidated lessons learnt will be made available in a paper that will be published by USPI.


Key Topics Covered:

  • Data Cleansing and mapping: How to transform raw engineering and supplier data into the CDE using ISO 8000, how to handle ‘manually’ errors, missing data, inconsistent models etc.
  • Case Studies from participants: Their lessons learnt by improving the quality of raw engineering and supplier data.
  • Role of AI in Data Cleansing: Explore how AI can automate and enhance the data cleansing and mapping process, including detecting inconsistencies, identifying duplicates, and filling in missing values.
  • Digital Thread: How the digital thread is created and used to track and record all the steps and changes made to the plant database. This should support resolving errors, identifying next improvements and fulfilling the requirements of reporting to regulatory bodies. The assumption in this project is that using the digital thread is much more realistic than targeting a digital twin.
  • Acceptance of final data set: How to achieve acceptance of the final data, transitioned into the CDE, by the engineering disciplines and by the suppliers

Lessons Learnt:

We note the series 2 will address the lessons learnt in cleansing of data in the reference case of the Pallas Project and earlier projects and of the projects of the participating companies. This should warrant a complete insight into the barriers and obstacles companies may encounter when doing this exercise in their projects.

To benefit from participation to the project and effectively contribute to the workshop discussions, it is assumed…

USPI Annual / MB Meeting – Thursday 24 April 2025

Please be invited to join the FTF USPI Annual / MB meeting on Thursday 24 April 2025 which will be held from 14:00 – 17:00 CEST.

The meeting will be held at the offices of LyondellBasell in Rotterdam, NL.

Address: Delftseplein 27, 3013 AA Rotterdam.

The purpose of the meeting is to:

  • Review and approve the USPI business plan for 2025
  • Provide an update of recent developments in the Facility Lifecycle 3D Model Standard (FL3DMS) and the Tagging Specification project
  • Discuss implementation of interoperability- and integration standards.

The agenda is as follows:

  • Welcome, purpose and introductions
  • Business plan 2025
  • Results of the FL3DMS FTF project meeting held earlier during the same week
    Presentation Tagging project
  • Presentation of an implementation of data interoperability standards within an enterprise context
  • Panel discussion on successes and improvement areas in integration and interoperability standards

The detailed agenda will be made available here. It will be shared once all speakers and panel members are confirmed

Logistics

  • The location can be reached by train from Schiphol Airport
  • Cars need to be parked in the available city parking facilities
  • Hotels can be booked in several hotels very close to the office location
  • For security reasons, pre-registration for attending is required 

Join Us!

If you are interested in participating in this meeting, please register here. 

We look forward to seeing you there! 

USPI Safari: A Different Approach to Construction Work Management

We are pleased to have hosted the recent USPI Safari, which featured a special session titled “Construction Work Management: A Different Approach to AWP.” The session was presented by Saber Belghith, Founder & CEO of KonnectXD, and provided valuable insights into innovative strategies that can enhance the management of construction workflows.

📅 Date: Thursday, April 3rd , 2025

⏰ Time: 14:30 – 16:00 CEST

📍 Location: Online (Microsoft Teams)

About This Session

Efficiently managing construction work has long been a key challenge in large capital projects. Issues such as rework, schedule slippage, safety risks, material availability, and commissioning delays have continued to impact project outcomes.

In this session, Saber Belghith presented how KonnectXD’s approach offered a new perspective on managing construction planning and execution, with the goal of improving efficiency and reducing risk.

One of USPI’s 2025 objectives for the Facility Lifecycle 3D Modelling Standard (FL3DMS) is to enhance the Standard and Lifecycle Guide with data requirements for construction planning. This enhancement was based on CII AWP data models and included requirements for visualizing the path of construction.

With a learner mindset, USPI invited Saber Belghith from KonnectXD to share their approach to managing construction work and planning in large capital projects within the Oil & Gas industry.

USPI invited KonnectXD to share their expertise on:

✅ How their approach addresses common construction challenges.

✅ The impact of process change, data synchronization, and technology.

✅ A comparison with CII AWP data standards and how this methodology differs.

✅ Key data requirements for Owner Operators (OOs) and EPCs.

This interactive session included a 30-45 minute presentation/demo, followed by an open discussion and Q&A.

You can find the recording and presentation from Saber here. 

We look forward to seeing at the next USPI Safari!

New USPI Member Gizil as per Feb 2025

As of 5 February 2025, Gizil has officially joined USPI as a member. We are pleased to welcome Esma Gulten, who will represent Gizil on the USPI Management Board (MB). We look forward to a successful and productive collaboration.

Esma Gulten is the Cofounder & CEO of Gizil GmbH, leading innovation in engineering and industrial digitalization with a focus on Virtual Plant (VP) technology. With a double major in Industrial and Mechanical Engineering, she has extensive experience in strategic planning, business development, and digital transformation. She actively contributes to Information Management in industrial asset lifecycle by integrating 3D asset contextualization, data-driven decision-making, and compliance solutions into digital platforms. Recognized in Scale-Up NRW, Global Tank Storage Awards, Rising Stars in Industry and Forty Under 40, she drives internationalization and industry-wide digitalization efforts.

Gizil is a leading engineering and digitalization company specializing in industrial asset management through its Virtual Plant (VP) solution. Combining multi-disciplinary engineering expertise, 3D laser scanning, and advanced software development, Gizil provides a single source of truth for complex facilities. Our solutions enhance operational efficiency, data integrity, and asset traceability. We have joined the association to collaborate with industry leaders, contribute to digital transformation initiatives, and drive innovation in asset lifecycle management.

New FL3DMS Member ReVisionz as per Jan 2025

ReVisionz officially joined USPI and the FL3DMS project as a member on January 24, 2025. We are pleased to welcome Curtis Bookout, who will represent ReVisionz as a USPI Management Board (MB) member and actively contribute to the project’s in-depth discussions. We look forward to a productive collaboration!

About Curtis Bookout:

He will be representing ReVisionz as part of the USPI and FL3DMS project. Curits has over 25 years of industry experience spanning the life-cycle of facilities (capital projects through O&M). Curtis has led highly complex projects implementing engineering design tools, and more specifically 3D modelling solutions for Owner Operators. Curtis is recognized as an industry thought leader and has presented at industry conferences and participated in product strategy working groups. 

About RVisionz

Pioneers in digital transformation programs since 2001, we are the premier consulting and implementation partner for Owner-Operators who want to enable an intelligent, digital view of physical assets for decision-makers, unlocking value and reducing process and regulatory risk.

As the leader in this specialized field, asset owners in process and manufacturing industries trust ReVisionz to guide their digital transformation journey. With insights based on decades of experience developing and implementing digital twin solutions and AIM programs, we offer a holistic approach that helps clients reduce their assets’ total cost of ownership, by establishing a digitalization roadmap based on business capabilities to meet strategic initiatives.

ReVisionz is excited to participate in the FL3DMS project and looks forward to collaborating with industry leaders to drive standardization and business value maximizing the use of 3D modeling across the facility life-cycle for Owner-Operators. 

USPI Chairmans Letter 2025

Dear USPI members and interested parties

Hereby our annual update on the activities and plans of USPI. It starts with a summary of data standardization developments in the process industries and in

USPI. It subsequently moves on to our plans for the coming period, in which more will be published on our website in due course.

Developments in process industries & USPI

2024 has been a year of turmoil. Many companies in the industry are going through reorganisations and are continuing to globalise and align their internal working processes. Cost pressure, shifting economic powers, aging workforce and new technologies to improve performance are themes that drive the changes.

The cost pressures in the industry are a remaining threat and impacting the availability of resources. There is a growing understanding that Cognitive Digital Twins and Artificial Intelligence will provide capabilities to improve safety, planning, quality and efficiency in operations and projects, and will help to meet customers’ expectations. A classical dilemma: short term quick wins versus long term, competitive wins. Without good quality data or without data interoperability, the cost to run Twins and AI implementations become high and often the initiatives fail to succeed.

The number of standardisation bodies and initiatives is high. Many of the same companies participate in multiple of them. This gives USPI the responsibility to carefully pick our own initiatives and to collaborate with other initiatives to develop a set of standards that are unique and complement each other. USPI has Memoranda of Understanding (MOUs) with multiple standardisation bodies where we work to align the standards and to create maximum return on investment.

USPI understands that a set of specifications is just the beginning of standardisation. The associated transformation of systems (people, process, data) requires guidance on how to apply these standards to help the industry to reap the benefits as quickly as and as good as possible. This is why we have delivered an implementation guide for the FL3DMS specification and started a knowledge sharing initiative for Information Management in Large Capital Facilities (IM-LCF).

The aforementioned cost pressures led to some members ending their USPI membership. We are sad to see them leave and wish them the best. On the other hand, we are also welcoming new members. Joint effort through participating in USPI’s initiatives is seen by our members to manage resources effectively as opposed to develop internal data standards by themselves.

For all the company representatives, please continue to work with your management to highlight the importance of the standardization work in general. If there is anything you need help with, please contact USPI (via stichting@uspi.nl) to see how we can help.

USPI is continuing to serve the process industries with relevant new standards related to 3D Models and Tagging requirements, and activities such as Safaris and the convenorship of ISO 15926. Also, we keep the focus on integrating with and supporting our sister organizations’ standards, of which a few are DEXPI, IOGP, CII, NORSOK and BuildingSmart.

Recent USPI Deliverables

A…

USPI Safari: Use and benefits of 3D models in commissioning | 13 Feb 2025

USPI Safari: Use and Benefits of 3D Models in Commissioning

USPI held a Safari session focused on the critical build-up of 3D/2D data and equipment information to facilitate successful commissioning.
The Safari was held online on Thursday, February 13, 2025, from 1:30 PM to 3:00 PM (UTC+01:00) Amsterdam.

During this session, participants explored key questions, including:

  • What were the requirements from a commissioning perspective?
  • What was the current state of data readiness?
  • What improvements were necessary, recommended, or optional in areas such as data management, processes, skills, timing, and capabilities?
  • What were the potential impacts on cost, scheduling, and other project outcomes?

This 90-minute online Safari provided a deep dive into the use and benefits of 3D models in commissioning, with at least half of the time dedicated to Q&A and discussion.

Featured Presenter

Paul Turner, Founder of The Industrial Commissioning Association (ICxA), led the session.

Paul’s career began in the aerospace industry, where he built satellites and rockets for the Canadian Space Agency. He later transitioned to the power sector, applying the rigorous quality standards of aerospace engineering to commissioning hydroelectric generating stations, HVDC transmission systems, and wastewater treatment facilities. Recognizing the gap in quality emphasis between aerospace and ground-based projects, he founded ICxA to promote advanced commissioning practices and help professionals achieve better schedule and budget outcomes for capital mega-projects.

Learn more at www.ICxA.net.

ICxA’s Core Principles

  • Access to Industry Best Practices – Making industry-leading commissioning practices accessible to everyone working on large-scale projects.
  • Commissioning Competency – Setting global standards for industrial plant and energy system commissioning.
  • Commissioning Advocacy – Building bridges between stakeholders to highlight the value of effective commissioning.

Thank You for Joining Us

We appreciated everyone who attended this free USPI Safari.

You can find the presentation and recording here.

FL3DMS Release 1.2 (Oct 2024)

What is the Facilities Lifecycle 3D Model Standard (FL3DMS)?

FL3DMS is a USPI initiative that aims to achieve standardization across the process- and energy supply chains for the development, use and maintenance of 3D models. A team of 3D model subject matter experts were assembled from Owners, Contractors and Software Suppliers to deliver a standard.

Whilst working on the project, the team has developed a number of deliverables to achieve this goal.

·       The initial release, R 1.0 included a 3D Model Standard based on the company standards of the participants. It also included a Business Case for standardizing and maintaining 3D models during the lifecycle of a facility, based on experience from the Owners.

  • An subsequent release of the standard, R 1.1, included unique numbering of the text clauses in the standard to enable requirements management, embedment in company standards and version history.
  • In this latest release, 1.2, best practices for requirements writing has been applied and the requirements numbering has been extended to the 3D Model content requirements table. The release also includes a 3D Model Lifecycle Management Guide to guide Owners on how to manage 3D Models to extract more value from them.
  • The future releases are expected to include greater specifics on As Built requirements, Modelling of Equipment/Skids, and 3D Model data needed to support Advance Work Packaging (AWP) and corrosion management.  An implementation guide is also planned to accompany the next release. 

What is the scope of the FL3DMS standard?

The FL3DMS specification is a practical, application neutral, specification for the structure and content of 3D Models, designed to guide the creation, handover and maintenance of 3D models in capital projects and assets.  It is based on existing company standards and best practices of the FL3DMS participants, and includes technical requirements for the creation and handover of 3D models to enable use-cases in projects and operations. These include 3D model design integration, construction, plant operations, Digital Twins and replication of 3D designs. The FL3DMS specification is recognized by participants and other parties as a solid basis for use in specifying 3D model requirements for facility projects.

FL3DMS Release 1.2 | What’s new?

In the new FL3DMS Release 1.2 , the clauses of the standard have been re-written to comply with IOGP’s Guidance Requirements Development making the requirements clear and unambiguous, and enabling better specification of requirements by Principals to Contractors. 

The new Facility 3D Model Content Requirement Matrix is much improved over the previous table. The content has been updated and aligned with NORSOK Z-020:2024 Model requirements for 3D solutions thanks to a close collaboration with Standards Norway.   It now includes unique numbering for each line of content and the addition of an aggregated level of content.

The aggregated level of content allows more mature supply chain partners to define the requirements in a way that is more aligned with the level of responsibility that is expected from the supply chain partners

Roadmap for next releases

During the FL3DMS face to face meeting in…

USPI Safari on Greenhouse Gas

Insights from the USPI Safari about Greenhouse Gas:

The USPI Safari on Greenhouse Gas recently brought together 31 experts from the oil and gas sector in a webinar, led by Ian Cornwell from Kraken IM.

The purpose of the webinar was to present and discuss a possible role of international IM standards in the domain of greenhouse gas emissions and to explore in what stage of capital projects such standards would have maximum impact on GHG emission reduction.

Understanding Carbon Emissions:

The difference between CO2 and CO2e was explained, as well as the challenges of measuring and reducing emissions, especially concerning Scope 3 emissions.

Regulatory Landscape:

Participants were informed about the forthcoming regulations such as CBAM and IRA, along with an exploration of the potential implications these regulations may have on the sector. Additionally, there was an examination of emerging carbon pricing mechanisms.

Carbon Management Frameworks:

PAS 2080 was introduced as a “tool” for integrating carbon emission reduction early in project design, as the potential in that stage is the highest. There was a emphasis on the importance of setting and achieving carbon reduction targets through predictive modeling and standardized reporting.

Key Insights from Q&A Session:

The Q&A session shed light on the predictive nature of emission calculations in the early stages of large capital projects since the potential there is highest.

It was also pointed out that procurement practices may have an impact because of the way equipment is produced by suppliers (for example green steel).

It was noted that the further development of standards for CO2 and CO2e is important. 

Closing Remarks:

In conclusion, Ian Cornwell expressed willingness to contribute to follow-up sessions organized by USPI. It was agreed the presentation will be distributed to the attendees. 

The ongoing need for collaboration and knowledge sharing within the industry is considered important.

The USPI Safari on Greenhouse Gases provided a valuable platform for industry professionals to engage in meaningful dialogue on the use of standards in the domain of CO2 and CO2e in the oil and gas industry.

>>you can download the presentation and recording here

Summary of FL3DMS FTF meeting of 4-6 June 2024

USPI Hosts Successful Annual 3D Model Standardisation Meeting for the FL3DMS team at Shell’s Amsterdam Office.

From June 4 to June 6, 2024, USPI held a productive FL3DMS Face-to-Face (F2F) meeting at Shell’s office in Amsterdam. The event brought together leading companies in the process industry supply chain to collaborate on how to further improve the standard and widen its use.

The meeting addressed key challenges such as methods for As Building 3D Models, management and sharing of 3D catalogues, and integration of 3rd party content from module- or equipment-suppliers. The open dialogue and constructive contribution of all participants reflected the willingness of the Owner Operators, EPCs and Software Suppliers to solve the key pain-points related to 3D Models. 

A survey conducted prior to the meeting indicated that only ~20% of Owner Operators manage 3D Models for the lifecycle to realise the full value of the models. At the meeting it was discussed how to shape the Implementation Guide for the 3D Model FL3DMS standard in such a way that more owners get full value from their 3D Models. Key takeaways were that:

  1. Owner Operators need to create a clear strategy for the uses and lifecycle management of the 3D Model up front, such that this can inform the content required in the model and the level of detail and accuracy.
  2. EPC contractors need to support the lifecycle management process by open publication and sharing of the catalogues used to create models in support of the lifecycle management of 3D Models. Today the 3D catalogues are sometimes not shared under the pretext of IP or confidentiality. However, in Norway this model has been cracked, and EPCs now openly share their catalogues along with the 3D models, with the clear understanding that they own the source catalogue content definition, but that the content can be used by others to keep the 3D Model As-Built. A similar model will be proposed in the soon to be published paper on catalogue management.

It was highlighted that trust and effective communication across the supply chain are critical factors for successful 3D model integration and lifecycle management.

Roadmap and release planning

The FL3DMS roadmap was updated with a planning for upcoming releases. Target future deliverables include:

  • Scope of Release 1.2 (Q2 2024): Alignment with IOGP requirements and embedding unique IDs into company standards.
  • Scope of Release 1.3 (2025) Data Model – requirements for AWP Requirements for 3D models from licensors / JV partners / modules & packaged units / equipment sub-contractors Options for As Built Requirements. Corrosion Management. Planning data Position paper on Catalogue Management
  • Scope of Release 1.4 (2026) Integration w other design tools Align content requirements objects with CFIHOS classes. Requirement filter for different project types, scopes and phases

An approach for the way forward with the change management procedure was also agreed.

Awareness and usage of the standard

A key objective is to drive greater awareness and usage of the standard. All the FL3DMS deliverables are therefore published for free. Marketing efforts…

Presentation USPI on PIDMIC 3.0

Presentation USPI on PIDMIC 3.0 – Process Industry Data Model Integration Congress 3.0  – a first step towards better harmonization

As a key part of the Process Industry Data Model Integration Congress (PIDMIC) at ACHEMA 2024, this USPI presentation by Leo van Ruijven, contributes to the overarching goal of enhancing data model integration in the process industry.

 PIDMIC serves as a collaborative platform where industry experts, researchers, and software vendors unite to drive innovation and standardization in data management.

In the USPI presentation ‘ISO 15926 part11 – Semantic Modelling’ it is reported what has been improved in the 2023 version of part 11, which experiences have been made in the last years of implementing this part and how this helps integrating existing industrial information model standards like CFIHOS and DEXPI etc. 

Part 11 of ISO 15926 is about a ‘simplified industrial usage of reference data based on RDFS methodology’ and has been updated in 2023.

Download the presentation here.

USPI Chairmans letter 2024

Dear USPI members and interested parties,

Hereby our annual update on the activities and plans of USPI. It starts with a summary of data standardization developments in the process industries and in USPI. It subsequently moves on to our plans for the coming period, in which more will be published on our website in due course.

Developments in process industries & USPI

Efforts to put in place data standards for the process industries are progressing, despite cost pressures that affect resource availability for such work. The response of the standardization bodies has been greater cooperation on the development of data standards across the sub-sectors of chemicals, oil and gas, nuclear and power generation.

To illustrate, hereby an update on some of the many positive developments. This year DEXPI is organising another Process Industry Data Model Integration Conference (PIDMIC) in June to drive alignment between the different data standards. IOGPs’ Information Standards Sub-Committee will deliver a guideline document on the various Data Standards available later this year. CII has completed the work on its data model for Advance Work Packaging, as an extension of the Capital Facilities Information Hand-Over Specification (CFIHOS) data model. And CFIHOS is currently finalizing its next release, which includes JIP33 and spare parts data requirements.

USPI is continuing to serve the process industries with relevant new standards related to 3D Models and Tagging requirements, and activities such as Safaris and the convenorship of ISO 15926 to integrate with and support our sister organisations, of which a few are mentioned above. 

Recent USPI Deliverables

A key recent deliverable of the Facilities Lifecycle 3D Model Specification (FL3DMS) project is a“3D Model Lifecycle Guide”, which helps owner operators understand the activities and decisions needed to specify and manage 3D Models in Projects and Asset such as to derive full value from them from cradle to grave. You can download the guide free of charge here
It is easy to read and does not require any specialist 3D Modelling knowledge. If you find it useful, please distribute it within your network.

The first deliverable of the Tagging Philosophy Requirements project was also released, it is a “Tagging Requirements Matrix” listing tagging use-cases against objects, highlighting what needs to be tagged in support of each use case.  This matrix is intended to serve as a baseline for writing and tagging philosophy for a project or an asset.

We also held a number of popular Safaris to create awareness about other relevant standards: 

  1. Plant Design using ISO15926 at Pallas Nuclear Plant –  Leo van Ruijven & Paul van Exel
  2. Process design using Dexpi & Dexpi+ – Gregor Tolksdorf & Reiner Meyer-Roessl
  3. Equipment information exchange w. Asset Administration Shell / IEC61987 – Björn Höper
  4. Requirements writing best practices based on IOGP guide – by Eric Schreiber
  5. Information handover with CFIHOS – status & latest developments by Peter Townson
  6. Green-House Gas (GHG) estimation based on design data – by Ian Cornwell

Planned deliverables for the coming period

FL3DMS

The FL3DMS project is set to…

3D Model Lifecycle Management Guide for Process Plants

An informative guide to scoping a 3D model for use in capital projects and asset digital twins and to the activities & investments necessary to build and maintain it throughout the facility lifecycle.

Background

The 3D Model Lifecycle Management Guide was developed on the back of the Facilities Lifecycle 3D Model Specification (FL3DMS), which is a practical, application-neutral specification for the structure and content of 3D Models, designed to guide the creation and maintenance of 3D models in capital projects and assets.  It is based on existing company standards and best practices of the FL3DMS participants and includes technical requirements for the creation and handover of 3D models to enable use-cases in projects and operations.  The first version of the 3D specification was issued in 2021.  

In parallel with the second revision of the FL3DMS standard, work started on educational guides for implementing the FL3DMS standard in a 3D Model and managing and maintaining 3D Models for the entire asset lifecycle. The team has also developed a business case for maintaining the 3D model during the lifecycle of a facility. The FL3DMS implementation guide for the FL3DMS standard is under development and will be released later in 2024. 

Scope and target audience 

The Lifecycle Management guide aims to enable owners of 3D models to manage and use their 3D models for the entire facility lifecycle, thereby optimising the business value generated from the 3D model. It is written so that all managers and stakeholders with little or no 3D model experience can understand the content and establish the strategy for the lifecycle of their facility 3D model. Everyone involved in a facility’s design, construction, operation and maintenance have different needs from the 3D model. The intent is to deliver a 3D model that satisfies their requirements.  


The guide also provides information on the development and maintenance of 3D models for the lifetime of a facility, from ‘cradle to grave’, including:  

  • 3D model application selection. 
  • 3D model ownership, hosting and support.
  • 3D model contracting strategy. 
  • 3D model deliverables development, review and data validation. 
  • Construction and as-built processes for evergreening the 3D model. 
  • Operational use of the 3D model. 
  • Benefits of an evergreen 3D model. 
  • Foundations for visualisation of extended dimensions— such as schedule/planning, cost and sustainability. 

Cost / Benefit Considerations for 3D Model Content Requirements 

The lifecycle guide also gives guidance on the strategic options when scoping a 3D Model to ensure that it meets project and operational requirements at the lowest possible cost and includes a model for mapping content versus resource/cost impact. 

How do I get hold of the 3D Model Lifecycle Guide and the FL3DMS standard?

You can download the FL3DMS 3D Model Lifecycle Management Guide for free by clicking this link. Please share the Lifecycle Management Guide with anyone who may benefit from it.  

To accelerate the adoption of the FL3DMS 3D Model standard, the FL3DMS standard is also available for the public to download. You can request a download of FL3DMS from USPI by contacting…

USPI Face to Face meeting on 04 – 06 June 2024

Dear ALL,

Please be invited to the FL3DMS – Tagging – USPI MB Face to Face meeting which will be held in Amsterdam on 04-06 June 2024.

The FL3DMS and Tagging meeting will be hosted by Shell at the Energy Transition Campus in Amsterdam.
The USPI MB Meeting will be hosted online via Teams.

Cumulative registration results and meeting details can be found here

Please find the agendas below:

FL3DMS (Only FTF)

The objectives of the FL3DMS meeting will be:

  • Review and mature draft content in anticipation of the next release –including the FL3DMS standard itself, the implementation guide and the 3D catalogue positioning document. Define next steps for how to support 3D catalogues at company and industry level.
  • Update roadmaps and release plans and define clear objectives and content requirements for upcoming releases including process for managing changes
  • Broaden our awareness of other 3D Model Standards & Formats, and understand their position and overlaps relative to FL3DMS to improve alignment across the standards landscape. Decide on preffered formats for use when specifying 3D content from package suppliers and engineered equipment suppliers.
  • Assess current marketing efforts after publication of the 3D Model Lifecycle guide, and agree how we can better widen the footprint of the standard in terms of use and participation

Tagging (Only FTF)

The Objectives of the Tagging meeting will be:

  • Team alignment by defining a vison and mission based on the Terms of reference and the Tagging Use Case matrix.
  • Align on the terms used for tagging.
  • Define the Tag Life Cycle, from unmaterialized to materialized and maintenance.
  • Start with Sprint 3 activities to understand existing standards and how they amend each other with respect to tagging. 

USPI Annual MB (FTF and Online)

The Objectives of the USPI MB meeting (Thursday 07 June afternoon) will be:

  • Provide an update on the plans and organization of USPI, including change of leadership.
  • Provide an update on our key projects and activities, including ISO, FL3DMS, The Tagging Philosophy Standard and the Safaris
  • Highlight important developments in the data standard landscape – with a focus on Advance Work Packaging and Cost Management 

If you haven’t registered already just fill in this short survey form at your earliest convenience via this link

Please be aware that participants should bring a valid ID.

Office address:

Shell – Energy Transition Campus Amsterdam (ETCA)

  • Grasweg 31
  • 1031 HW Amsterdam
  • Postal address
  • P.O. Box 38000
  • 1030 BN Amsterdam

We look forward to seeing you in June

Industry Tagging Philosophy

Industry Tagging Philosophy – A proposal for consideration

Problem Statement – Tagging is a unique identifier in the field and in digital systems….​

Clarity about extent of tagging the ability to implement different engineering or operational use cases. Examples​

  • Design – The increasing use of modular and package systems can lead to inconsistent levels of tagging with the parent facility and need for rework​
  • Construction – identification or tagging of objects required to enable Advance Work Packaging​
  • Operational – identification of manual valves, civil infrastructure or flanges to enable specific operational or digital use cases​
  • Digital – level of tagging determines level of classification required. Consistency of tagging affects interoperability of digital systems.​
  • A digital representation of the facility that does not reflect the necessary level of content means expensive rework after project handover​

…..but there is no industry guide about what to tag​

Proposal​

Project and operational use cases require different levels of granularity of tagging to different asset levels​

  • Identify minimum tagging requirements from existing tagging specifications shared by owner operators.​
  • Identify additional tagging requirements for specific use cases. Identify use cases and related philosophies of tagging for activities such as operational controls (eg isolation, maintenance), project controls (eg AWP), integration of 3D model and CFIHOS data in a future digital twin.​

Based on recent experience from FL3DMS, such a standard should be achievable within a 1-2 year timeframe.​

–          Would you or your company be able to participate in its development?​

–          Would your company be able to contribute its current tagging philosophy as input to this work?​

–          How do you think we should organise this work?​

Subject to sufficient participation (10-15 companies), we will kick off a working group, appoint a lead, shape a TOR and kick off the work.

As per July 2022, 7 parties have already been identified.
Should you be interested to join or should you wish to have more information please send an email to stichting@uspi.nl 

USPI Workshop on 16 April 2024: Lessons learned from large capital projects

Please be invited to the USPI workshop on lessons learned from large capital projects which will be held online on:

16 April 2024 from 12:00-13:30 UTC (corresponding to 14:00-15:30 CEST (Amsterdam)).

The purpose of the workshop will be to share and discuss bridging the gap between IM and the business in doing large capital projects.

When doing large capital projects in practice, amongst which the Pallas project in the Netherlands, we came across several problem areas and challenges in realizing the required information management system.

It seemed worthwhile to share this with the experts and managers from the USPI community that has grown over the years.

Bridging Information Management (IM) and engineering for the successful implementation of Common Data Environments (CDEs) within projects involves navigating various problem areas and challenges. These barriers can stem from technical, organizational, and cultural factors, among others. Understanding these barriers and their origins is essential to develop strategies to overcome them.

Problem Areas and Challenges

  • Integration of Systems and Standards: The disparity in software and data standards between IM and engineering tools can hinder seamless integration, leading to data silos and interoperability issues.
  • Data Quality and Consistency: Ensuring the accuracy, completeness, and consistency of data across different systems and stages of a project is a significant challenge. This often creates tension between quality of data and progress in the project as well as budget pressure
  • Change Management: The adoption of CDEs requires changes in workflow, processes, and roles, which can be met with resistance from stakeholders accustomed to traditional methods. this is reinforced by a lack of data management skills within engineering in general
  • Security and Privacy Concerns: Safeguarding sensitive information within a CDE, while ensuring that the right stakeholders have access to the data they need, is a complex balance to achieve.
  • Training and Skill Development: The lack of familiarity and expertise with IM principles and CDE platforms among engineering professionals can limit the effectiveness of implementation.
  • Cultural and Organizational Barriers: Different organizational cultures and structures can lead to misalignments in goals and expectations, hindering collaboration.

Barriers and their Origin

  • Technical Barriers: Stem from the complexity of integrating diverse systems and ensuring data quality across them.
  • Organizational Barriers: Arise from established procedures, hierarchies, and the resistance to change within organizations.
  • Cultural Barriers: Related to the differences in work cultures, communication styles, and the willingness to collaborate across disciplinary boundaries.
  • Semantically barriers: companies have developed their own technical languages which are difficult to integrate into a common data environment without in-depth knowledge and experience with interoperability

Overcoming the Barriers

  • Standardization and Interoperability: Develop and adhere to industry standards for data and software interoperability to facilitate seamless integration.
  • Organize ISO 8000 maturity checks within involved companies to create awareness of existence of barriers.
  • Data cleansing: To integrate data into a CDE from the many legacy engineering tools, knowledge and experience is required with regard to data cleansing of any information flow towards CDE
  • Education and Training: Invest in comprehensive training programs to build competency in IM…

Scientific publications about Digital Twins, that reference the FL3DMS 3D model standard

William Randell McNair is an active member of the FL3DMS team and has contributed actively to the development of the business case for standardizing and maintaining 3D models As Built for the full asset life. As part of his doctoral research at the University of South Florida, Randell has published three articles about Digital Twins that reference FL3DMS as a relevant industry standard development. In the third article, the FL3DMS business case development is also referenced.

Randall has agreed to share these articles which we hereby publish, with gratitude for his ongoing support of the FL3DMS project.

Please find the links below:

xx

USPI Safari about CFIHOS – 29 June 2023

USPI Safari about CFIHOS

Learn more about: The Capital Facilities Information Hand-Over Specification (CFIHOS)

Please be invited to our USPI Safari about The Capital Facilities Information Hand-Over Specification (CFIHOS), also known as IOGP JIP36, on 29 June 2023 from 02:00 PM – 04:00 CEST.

Target Audience

This Safari is intended for:

  • Organisations that are not yet members of CFIHOS and who want to know more about the standard.
  • Staff within member-organisations that have only basic awareness of the standard and want to learn more about it. 

Presenters & Objectives

Peter Townson and Anders Thostrup will be your safari guides. Peter will provide an in-depth exploration of CFIHOS, including its background, history, implementation, and future plans. Anders will also join us to highlight the collaboration partners and their importance in advancing this specification.

Agenda:

  • Welcome – Anders
  • Introduction – Peter
  • Purpose of presentation – Peter
  • What is CFIHOS-JIP36? – Peter
  • Background and history, implementation – Peter
  • Forward plan – Peter
  • Collaboration Partners – Anders
  • Q&A 
  • Closure

Background USPI Safaris – your platform for connecting with peers

One of USPI’s goals is to provide a platform for members to exchange problems, developments and views about international standards and best practices for plant lifecycle information. Our safaris are one of our preferred mechanisms to achieve this goal, i.e. to get in contact with and involve our members and MOU partners. They are networking events, organized by USPI for members to share knowledge on information management and international standardization in the plant engineering supply chain. 

The purpose is to facilitate a member company to share in-depth knowledge on topics or developments taking place in their company with a group of experts from other member companies to encourage learning and networking across our members.

Interactive Format

This is a learning event. We therefore encourage your active participation and engagement. We will take questions and encourage dialogue throughout the session. At the end there will also Q&A session. If you have questions in advance that you would like to see answered during the session, please send them to vincent.grondman@uspi.nl and Peter Townson pt@iogp.org.

Hope seeing you on June 29th

On behalf of CFIHOS & USPI,

Peter Townson (CFIHOS Director) & Anders Thostrup (USPI Chair)

How to join:

If you are interested in joining this safari, please register via this link

Please forward this invite to colleagues and connections you may think would benefit from the Safari.

Looking forward to seeing you on 29 June 2023!

Article: “Car wash for data”: Best practices for Information and Configuration Management applied at Pallas nuclear facility

For those of you interested in how to manage the creation of a Common Date Environment (CDE) based on engineering information delivered by different companies using different engineering tools in a structured way, the article written by the USPI members Leo van Ruijven (Croonwolter&dros) and Jim Novack (Dynatec) provides a good starting point.

Although the target group for the article are people in the Nuclear industry, the content of the article provides a good basis for those looking into doing the same for any other regulated industry or industry in general.

The article is titled “Car wash for data”: Best practices for Information and Configuration Management applied at Pallas nuclear facility. It describes the Why, How and What for information from the engineering phase, the architecture of a Common Data Environment (CDE) that stores the information, and the process of making the information supplied by the different parties involved suitable for entry in the CDE in such a way that it meets the requirements of the CDE. As this information is provided in different data formats (because of the use of different tooling) and may not be modelled based on the common Integrated Information Model (IIM), the underlying data needs to be cleaned up like in a car wash to make it suitably cleaned to upload in the CDE.

Having the data in the CDE based on the IIM makes the CDE very suitable as the basis for a Digital Twin (DT) to support better operations and safety.

To download the article, please click here

FL3DMS (Facilities Lifecycle 3D Model Specification) project Specification download – Jan 2023

FL3DMS (Facilities Lifecycle 3D Model Specification) is a practical, application neutral, specification for the structure and content of 3D Models, designed to guide the creation and maintenance of 3D models in capital projects and assets. It is based on existing company standards and best practices of the FL3DMS participants, and includes technical requirements for the creation and handover of 3D models to enable use-cases in projects and operations. These include 3D model design integration, Advance Work Packaging (AWP), Digital Twins and replication of 3D designs. 

The first version of the 3D specification was issued in 2021, and member organizations are now implementing it and identifying improvement opportunities for the next version. To accelerate adoption of the standard, and its maturation via feedback, it is available for the general public to download. You can request a download of FL3DMS from USPI by contacting us at stichting@uspi.nl.

USPI FL3DMS requests a voluntary contribution of €500 to download the specification, cover the cost of administration, hosting and sharing the standard. If you pay this contribution, you will receive perpetual updates of the standard and associated documents, such as the business case for maintaining the 3D Model as Built and the FL3DMS implementation guide. You will also be invited to provide feedback to influence future updates of the standard. USPI members can request the standard free of charge. 

By downloading the FL3DMS (Facilities Lifecycle 3D Model Specification) Specification Rev 1_0, you agree to use the specification within your own organization and within the projects that are execute by it only. You agree not to share the specification with other organizations outside this scope. The intellectual property of the standard remains with USPI.

If your organization wishes to contribute to the development of the FL3DMS specification, you are invited to join USPI and FL3DMS as a member. Your company representatives will get full access to all USPI and FL3DMS members meetings, working group meetings and to the FL3DMS SharePoint or Teams (Microsoft) site where all project information is stored and can be accessed. We are currently working on the following deliverables:

  • The next release of FL3DMS specification, which will include requirements numbering and feedback from current users.  
  • An implementation guide on how to apply the specification
  • A conceptual data model on how to integrate 3D model data with other data sets defined by e.g. CFIHOS, DEXPI and CII AWP
  • A best practice guideline on As Built management of 3D models

Full FL3DMS membership is encouraged very much in view of the need to create critical mass and accelerate the standardization of the process industries.

USPI Safari about ISO 19008 – Summary

USPI Safari  ISO 19008- 11 October 2022

On the 11th of October USPI organized a so-called Safari on the ISO-19008 standard cost coding system used in the project control domain to classify scope, activities, costs and quantities for oil, gas and renewable energy systems across the entire facility lifecycle.

In the session Chevron, Equinor and Shell presented how they are currently using the standard across the various project control disciplines, the dataflow in capital projects, digitalization opportunities, coverage of the standard, etc.

Besides major owner operators also the Performance Forum; a joint industry project; presented on the use of ISO-19008 in supplying data-centric benchmark definitions.

One of the key objectives of the Safari was to drive interest and use of the standard. With over 50 attendees, the session was well attended, and we had an open, interesting and lively discussion.

Members of USPI can find the presentations here

Please send a mail to stichting@uspi.nl if you are a USPI member and would like to get access to the USPI-Members SharePont

USPI Safari about ISO 19008 – 11 October 2022

USPI Safari – 11 October 2022

Learn more aboutISO 19008– Standard cost coding system for oil and gas production and processing facilities.

We are pleased to announce that we will host the upcoming safari about cost and data planning, ISO 19008 which will be held online on  Tuesday 11 October 2022 – 13:00-15:00 CE

OPENING WORDS: Anders Thostrup > Welcoming words from USPI to set the scene on the value of open discussion in support of standardising cost and planning data, with the help of ISO 19008.

INTRODUCTION & EXPECTATIONS: Introduction & expectations of participants > to understand participants areas of interest and questions from the onset of the session.

WHAT IS 19008? This high-level presentation will highlight the scope and activities of ISO 19008, and its future roadmap for development e.g. in the area of renewable resources. There will also be room to ask questions and discuss the standard’s history and current content.

BUILDING ON BEST PRACTICES:

Three major Owner Operators(Shell, Equinor and Chevron) will discuss the opportunities and challenges associated with implementation of ISO 19008, such as improved cost estimating, planning and cost control, benchmarking across the industry and alignment with CFIHOS and other industry standards. Based on their experiences, participants will identify cross-sectoral synergies and common challenges that can be addressed by using the standard.

CLOSE, REVIEW AND FOLLOW-UP : Anders Thostrup will discuss opportunities for further knowledge exchange about ISO 19008, as well as improvements to the standard, including alignment with CFIHOS.

If you are interested in joining this safari, please let us know by sending a mail to meetings@uspi.nl

USPI annual MB meeting 16 June 2022 Report

USPI MB Meeting

On 16 June 2022, USPI hosted its annual Management Board meeting. With this article we want to share the key presentations with you all so you are aware of developments among in our industry and with USPI members and network.

Advance Work Packaging:
Mark den Boer and Jerome Jemotte presented how they have implemented Advanced Work Packaging on the Red2Green project in Pernis with a focus on how to structure data requirements in support of the process. This is the third time they are implementing AWP and they have an excellent grasp of the data requirements required to support this process.

Industry tagging Philosophy:
On behalf of IOGP and USPI we proposed to create an industry tagging philosophy to enable better integration via consistent tagging across scopes of different contractors, packages, vendors etc.  The presentation was well received, and we are now calling for 10-12 participants to kick off the work.  4 parties have already been identified.

Cost and Planning data standard:
Ferry Zollner presented ISO 19008 and its use-cases. The standard is used widely in our front end and project controls systems and is being adopted by several of our competitors and one of the benchmarking organisations.  This presentation is part of our wider effort to create awareness and widen adoption.

Instrumentation data standard: 
Wilhelm Otten and Heiner Temmen of DEXPI and NAMUR presented how parts of those two standards can be implemented to standardise instrumentation data; with a longer term objective to make such data application-neutral in a similar way that DEXPI has created a neutral format for the P&ID data.

Implementation of industry data standards, including CFIHOS:
Jean Luc Hoffert of Technip and John Leeflang of McDermott presented the EPC view of the current implementation of data standards

Business plan of USPI:
Martin te Lintelo presented the USPI results of 2021, plan for 2022 and finances.  These were supported and endorsed.

Future options plan:
Peter Paul Pruijn presented the future options planning document of USPI, and organised feedback on this in an interactive session.  There was overwhelming support for the “Shrink scenario” which will now be adopted by USPI

Please do not hesitate to get in touch should you have questions about these sessions, or about joining a project of USPI.
For access rights to SharePoint please contact vincent.grondman@uspi.nl

On behalf of the USPI Executive Committee

Vincent Grondman