Summary of the FL3DMS Presentation at the CFIHOS Face-to-Face Meeting 2026

Standardised information improves engineering, procurement and construction efficiency, while producing the key data required for commissioning and operations as a by-product. A proof of concept, demonstrated at the CFIHOS F2F meeting, shows how data standardisation can deliver measurable value for owner operators, engineering contractors, and software vendors alike.  Development of key engineering deliverables enabled by set of aligned data standards  After several years of collaboration between industry experts and standards communities, the alignment of four key engineering standards is reaching an important stage. At the CFIHOS PAU26 conference, held from 26–29 October 2026, a joint demonstration showed how FL3DMS, DEXPI, CFIHOS and CII Advanced Work Packaging (AWP) can work together to improve the flow of engineering information across project phases.   The significance lies in the alignment of these standards, which govern four key engineering deliverables of a capital project. Each standard addresses a specific part of the engineering…

Continue ReadingSummary of the FL3DMS Presentation at the CFIHOS Face-to-Face Meeting 2026

USPI Annual / MB Meeting – Thursday 23 April 2026

Dear USPI Member and interested expert ,  Please reserve Thursday 23 April 2026 in your agenda for the USPI Management Board Meeting and the Annual Meeting hosted at the McDermott offices in The Hague, The Netherlands. Key Speaker highlight| Frank van Ewijk  We are pleased to announce that Frank van Ewijk, Director Programmes at IOGP, will be delivering a keynote industry presentation  during the Annual Meeting. His session will provide insights into:  • Key focus areas for Owner Operators  • Major IOGP programmes including JIP33  • The role of standardisation and data in enabling these programmes Purpose of the meeting  During the meeting we will:  • Present the USPI results from 2025 and the Business Plan for 2026  • Share updates on current USPI projects and ISO activities  • Learn from peers about their journey with implementing data-interoperability standards  • Engage in valuable networking with industry colleagues Agenda Highlights  •…

Continue ReadingUSPI Annual / MB Meeting – Thursday 23 April 2026

FL3DMS & USPI Annual MB FTF Meeting (21–23 April 2026)

Great to look back on an inspiring and productive week in The Hague!A big thank you to everyone who joined the FL3DMS Face-to-Face Meeting (21–23 April 2026) and the USPI Annual & Management Board Meeting (23 April 2026).Over the past days, we had the opportunity to:✔️ Share insights and progress on FL3DMS and related initiatives✔️ Align on strategy and future roadmap✔️ Exchange knowledge across the industry✔️ Strengthen collaboration within the USPI network A special thank you to McDermott International, Ltd for hosting us and providing such a great venue for collaboration and discussion.The sessions, discussions, and energy in the room truly highlighted the importance of working together on standards, interoperability, and data-driven transformation across our industry.Many thanks as well to all speakers, contributors, and organizers for making this such a valuable and engaging event — and to all participants for your active involvement and openness.Looking forward to continuing this momentum and seeing you…

Continue ReadingFL3DMS & USPI Annual MB FTF Meeting (21–23 April 2026)

Hans Teijgeler Receives Royal Decoration for Pioneering Work in Engineering Information Standardization

On December 11, 2025, Hans Teijgeler was honored with a Royal Decoration Ridder in de orde van Oranje-Nassau during a ceremony at the Council Chamber of Bergen (NH), The Netherlands. This recognition celebrates his outstanding contributions to standardization of engineering information and data within the process industry supply chain, a field in which he has been a driving force for more than three decades.  Through his work at the Engineering Contractor Fluor which is a member of the association USPI, and his participation in projects under ISO TC 184/SC 4 (Industrial data), Hans played a pivotal role in developing ISO 15926, an internationally recognized standard series that enables Integration and exchange of information and data across the process industry supply chain—independent of specific software systems. His efforts have significantly improved the quality and consistency of engineering information in the process industries, and addresses growing demands for safety,…

Continue ReadingHans Teijgeler Receives Royal Decoration for Pioneering Work in Engineering Information Standardization

USPI Workshop on 16 April 2024: Lessons learned from large capital projects

Please be invited to the USPI workshop on lessons learned from large capital projects which will be held online on: 16 April 2024 from 12:00-13:30 UTC (corresponding to 14:00-15:30 CEST (Amsterdam)). The purpose of the workshop will be to share and discuss bridging the gap between IM and the business in doing large capital projects. When doing large capital projects in practice, amongst which the Pallas project in the Netherlands, we came across several problem areas and challenges in realizing the required information management system. It seemed worthwhile to share this with the experts and managers from the USPI community that has grown over the years. Bridging Information Management (IM) and engineering for the successful implementation of Common Data Environments (CDEs) within projects involves navigating various problem areas and challenges. These barriers can stem from technical, organizational, and cultural factors, among others. Understanding these barriers and their…

Continue ReadingUSPI Workshop on 16 April 2024: Lessons learned from large capital projects

USPI Safari about CFIHOS – 29 June 2023

USPI Safari about CFIHOS Learn more about: The Capital Facilities Information Hand-Over Specification (CFIHOS) Please be invited to our USPI Safari about The Capital Facilities Information Hand-Over Specification (CFIHOS), also known as IOGP JIP36, on 29 June 2023 from 02:00 PM – 04:00 CEST. Target Audience This Safari is intended for: Organisations that are not yet members of CFIHOS and who want to know more about the standard. Staff within member-organisations that have only basic awareness of the standard and want to learn more about it.  Presenters & Objectives Peter Townson and Anders Thostrup will be your safari guides. Peter will provide an in-depth exploration of CFIHOS, including its background, history, implementation, and future plans. Anders will also join us to highlight the collaboration partners and their importance in advancing this specification. Agenda: Welcome - Anders Introduction - Peter Purpose of presentation - Peter What is CFIHOS-JIP36?…

Continue ReadingUSPI Safari about CFIHOS – 29 June 2023

Article: “Car wash for data”: Best practices for Information and Configuration Management applied at Pallas nuclear facility

For those of you interested in how to manage the creation of a Common Date Environment (CDE) based on engineering information delivered by different companies using different engineering tools in a structured way, the article written by the USPI members Leo van Ruijven (Croonwolter&dros) and Jim Novack (Dynatec) provides a good starting point. Although the target group for the article are people in the Nuclear industry, the content of the article provides a good basis for those looking into doing the same for any other regulated industry or industry in general. The article is titled “Car wash for data”: Best practices for Information and Configuration Management applied at Pallas nuclear facility. It describes the Why, How and What for information from the engineering phase, the architecture of a Common Data Environment (CDE) that stores the information, and the process of making the information supplied by the different…

Continue ReadingArticle: “Car wash for data”: Best practices for Information and Configuration Management applied at Pallas nuclear facility

USPI Safari about ISO 19008 – Summary

USPI Safari  ISO 19008- 11 October 2022 On the 11th of October USPI organized a so-called Safari on the ISO-19008 standard cost coding system used in the project control domain to classify scope, activities, costs and quantities for oil, gas and renewable energy systems across the entire facility lifecycle. In the session Chevron, Equinor and Shell presented how they are currently using the standard across the various project control disciplines, the dataflow in capital projects, digitalization opportunities, coverage of the standard, etc. Besides major owner operators also the Performance Forum; a joint industry project; presented on the use of ISO-19008 in supplying data-centric benchmark definitions. One of the key objectives of the Safari was to drive interest and use of the standard. With over 50 attendees, the session was well attended, and we had an open, interesting and lively discussion. Members of USPI can find the presentations here Please send a mail…

Continue ReadingUSPI Safari about ISO 19008 – Summary

USPI annual MB meeting 16 June 2022 Report

USPI MB Meeting On 16 June 2022, USPI hosted its annual Management Board meeting. With this article we want to share the key presentations with you all so you are aware of developments among in our industry and with USPI members and network. Advance Work Packaging:Mark den Boer and Jerome Jemotte presented how they have implemented Advanced Work Packaging on the Red2Green project in Pernis with a focus on how to structure data requirements in support of the process. This is the third time they are implementing AWP and they have an excellent grasp of the data requirements required to support this process. Industry tagging Philosophy:On behalf of IOGP and USPI we proposed to create an industry tagging philosophy to enable better integration via consistent tagging across scopes of different contractors, packages, vendors etc.  The presentation was well received, and we are now calling for 10-12 participants to…

Continue ReadingUSPI annual MB meeting 16 June 2022 Report

USPI annual MB meeting – 13 Feb 2020, Hoofddorp, NL

On Thursday 13 Februari 2020, the USPI annual MB meeting was held at the Offices of Fluor in Hoofddorp, NL. The meeting ran from 09:00 to 18:00 hrs, and was followed by drinks until 19:00 hrs. Over 50 experts and managers from The Netherlands, Europe, Malaysia and the US participated in the meeting. The key topics were: Management changes in USPI USPI project proposals for 3D and Systems Engineering The CFIHOS project Current interest level in process industry for IM and standardization. Investing in standardization in Building & Construction and Infrastructure A brief summary of these key topics is given below with the agreed actions Conclusions and actions on key topics: At the closed meeting the activities done in 2019 were presented and the plan for 2020-2021 was approved by the members of USPI. They also approved Martin te Lintelo as successor of Paul van Exel who will…

Continue ReadingUSPI annual MB meeting – 13 Feb 2020, Hoofddorp, NL