Slide

The new IOGP publication, Report 805, highlights three core standards initiated by USPI. Together, they support more consistent information exchange across the asset lifecycle. They also show how USPI’s work connects with wider industry standardisation efforts.

previous arrowprevious arrow
next arrownext arrow

Industry Platform

USPI is an independent industry platform that brings together asset owners, engineering contractors, technology suppliers and other specialists to improve the way lifecycle information is created, exchanged and maintained.

Practical Industry
Solutions

Its work is driven by practical industry needs and focuses on areas where common requirements and standards can reduce ambiguity, improve interoperability and support more reliable information across projects and operations.

Standards & Alignment

Through initiatives such as FL3DMS, USPI helps companies align requirements and develop practical industry guidance. Its work connects with standards and initiatives including CFIHOS, DEXPI, ISO 15926 and CII AWP to reduce fragmentation and improve interoperability across the process industry.

Latest News

Summary of the FL3DMS Presentation at the CFIHOS Face-to-Face Meeting 2026

Standardised information improves engineering, procurement and construction efficiency, while producing the key data required for commissioning and operations as a by-product. A proof of concept, demonstrated at the CFIHOS F2F meeting, shows how data standardisation can deliver measurable value for owner operators, engineering contractors, and software vendors alike. 

Development of key engineering deliverables enabled by set of aligned data standards 

After several years of collaboration between industry experts and standards communities, the alignment of four key engineering standards is reaching an important stage. At the CFIHOS PAU26 conference, held from 26–29 October 2026, a joint demonstration showed how FL3DMS, DEXPI, CFIHOS and CII Advanced Work Packaging (AWP) can work together to improve the flow of engineering information across project phases.  

The significance lies in the alignment of these standards, which govern four key engineering deliverables of a capital project. Each standard addresses a specific part of the engineering lifecycle. Their combined use enable the output from one step to be used as input to the next without the need to recreate, reconcile and manually transfer information between disciplines, systems and project phases. 

Four standards, one connected engineering process 

The demonstration brought together four complementary and aligned standards: 

  • Front End Engineering: Data Exchange in the Process Industry (DEXPI) supports the creation and exchange of structured 2D Process and Instrumentation Diagrams (P&IDs), including tags, piping, properties and plant topology. 
  • Detailed Design: Facility Lifecycle 3D Model Standard (FL3DMS) defines requirements for the content, configuration, delivery and lifecycle management of 3D models based on the P&IDs. 
  • Construction: Advanced Work Packaging (AWP) supports construction planning (4D) and execution (5D) based on the project schduel and work packages defined in the 3D Model. 
  • Commissionong and Handover: The Capital Facilities Information Handover Specification (CFIHOS) defines requirements and structure for engineering and asset information exchange, integration and handover. 

The alignment allows information created by each engineering discipline to be reused in subsequent project phases.  It also allows generation of handover information in the right format at source.  

The alignment is enabled via common data structures and terminology in all the standards. For example, FL3DMS uses DEXPI and CFIHOS classes in its 3D Model Content Requirements Matrix, incorporates CFIHOS and CII AWP entities and properties in its Data Model and Dictionary, and uses CFIHOS discipline and document types in its Deliverables List. 

Demonstrating interoperability in practice 

To demonstrate the potential of this alignment, the contributing teams developed a small engineering project using data from a DEXPI-based P&ID to develop an FL3DMS-compliant 3D model, which in turn was used to define work packages and a 4D path of construction.  The data generated was also used to populate several handover deliverables. 

Key engineering The demonstration showed how consistent engineering information could support: 

  • Automated consistency checks between P&ID and 3D model information, verifying consistent topology but identifying an additional valve and inconsistent piping specifications. 
  • Automated generation of engineering deliverables, including 11 fabrication isometrics. 
  • Definition of construction work packages and a 4D construction plan using 3D model data. 
  • Generation of 14 CFIHOS-compliant handover…

Wood joins USPI and FL3DMS

About Ben Martin:

Ben Martin is the Digital Sustain Lead with 20 years industry experience and a strong focus on digital asset data, and the long term sustainability of engineering information across the asset lifecycle. He works closely with engineering, operations, and digital teams to improve data quality, governance, and the accessibility of critical information. Ben is passionate about driving practical digital transformation, enabling better decision-making through structured and trusted data. His work supports the adoption of industry standards and collaborative approaches that deliver greater value for clients and asset owners.

Why Wood is Joining USPI and FL3DMS

Wood is a global consulting and engineering company that delivers solutions across energy, materials, minerals, and industrial markets. As digitalisation continues to transform the industry, effective management and exchange of engineering information has become increasingly important.

Wood has joined USPI and is participating in FL3DMS to help shape the future of open, interoperable information standards for engineering and asset lifecycle data. Collaboration through FL3DMS supports Wood’s commitment to improving data consistency, reducing information handover challenges, and enabling more efficient digital delivery for clients. By working alongside industry partners, Wood aims to help drive innovation and accelerate the adoption of standards that improve the quality, usability, and longevity of engineering information.

New USPI report published: lessons learned from IM-LCF Workshop Series 1

USPI has published the first report from the Information Management in Large Capital Facilities project, or IM-LCF.

The report, IM-LCF Project Report on Series 1, presents the findings and lessons learned from the first IM-LCF workshop series. This series examined how organisations can use ISO 15926-11 and a Common Data Environment to improve the integration and management of information throughout the lifecycle of a large capital facility.

Addressing fragmentation in large capital projects

Large capital projects involve many organisations, disciplines, systems and lifecycle stages. Project information is therefore often fragmented across separate tools, data structures and organisational boundaries.

The report explains how this fragmentation affects the consistency, traceability and reuse of information. It considers both organisational fragmentation between project partners and fragmentation over time between requirements, design, construction, operations and maintenance.

Workshop Series 1 focused on the role of a data-centric Common Data Environment in addressing these challenges.

Main topics covered

The report discusses:

  • the practical role of a Common Data Environment;
  • the use of ISO 15926-11 for structured and connected lifecycle information;
  • information architectures, project ontologies and reference data;
  • integration of documents, engineering data and graphical models;
  • information maturity and organisational readiness;
  • data quality requirements;
  • governance, responsibilities and management support;
  • limitations in existing software tools; and
  • lessons learned from participating organisations.

The report does not prescribe a single implementation method. Instead, it provides practical guidance, recommendations, templates and considerations that organisations can adapt to their own project context.

Practical guidance for industry

The publication is intended for owner operators, EPC contractors, engineering companies, suppliers, software providers, consultants and information-management professionals involved in large capital facility projects.

It can help organisations:

  • define realistic information-management ambitions;
  • identify organisational and technical barriers;
  • improve data quality and integration;
  • strengthen collaboration between engineering, information-management and IT functions;
  • evaluate the use of international standards; and
  • make better-informed decisions about Common Data Environment implementation.

The report was prepared by the USPI IM-LCF project team with contributions from specialists representing several organisations in the process and energy industries.

Part of the wider IM-LCF programme

Workshop Series 1 is the first part of a four-series programme.

Workshop Series 2 addressed the cleansing and integration of engineering and supplier data. Workshop Series 3, on Information Maturity Assessment, is currently in progress. Workshop Series 4 will focus on defining the capabilities that software tools should provide to support standards-based information management in integrated project environments.

USPI will publish separate reports on the findings from the other workshop series.

Publication details

Title: IM-LCF Project Report on Series 1
Publication number: I-RE1-001 IM-LCF S1
Publication date: 1 July 2026

Organisations interested in IM-LCF or future workshop activities are invited to contact USPI at stichting@uspi.nl.

USPI Annual / MB Meeting – Thursday 23 April 2026

Dear USPI Member and interested expert , 

Please reserve Thursday 23 April 2026 in your agenda for the USPI Management Board Meeting and the Annual Meeting hosted at the McDermott offices in The Hague, The Netherlands.

Key Speaker highlight| Frank van Ewijk 

We are pleased to announce that Frank van Ewijk, Director Programmes at IOGP, will be delivering a keynote industry presentation 

during the Annual Meeting. His session will provide insights into: 

• Key focus areas for Owner Operators 

• Major IOGP programmes including JIP33 

• The role of standardisation and data in enabling these programmes 

Purpose of the meeting 

During the meeting we will: 

• Present the USPI results from 2025 and the Business Plan for 2026 

• Share updates on current USPI projects and ISO activities 

• Learn from peers about their journey with implementing data-interoperability standards 

• Engage in valuable networking with industry colleagues 

Agenda Highlights 

• 13:30 Management Board Meeting (only for USPI members) 

• 14:00 Annual Meeting (Open): 

• FL3DMS Face-to-Face read-out 

• Project presentations (Tagging and Coding, IM-LCF) 

• Update ISO activities 

• Data Standards Quiz 

• Key industry presentation by Frank van Ewijk 

• Summary, actions, and closure 

• 16:30 Drinks and networking 

Logistics 

The venue is easily reachable by public transport. 

Click here to see more information about the logistics. 

Address 

Haagse Poort Prinses Beatrixlaan 35 2595 AK, The Hague,NL Tel +3170 373 2010 


Join us! 

If you wish to participate, please register here

Please note that, for access to the McDermott office building, all participants are kindly requested to bring a valid form of identification (passport or national ID card). Identification must be presented at reception upon arrival. 


We look forward to welcoming you in The Hague and collaborating with you on another impactful year for our industry. 
Kind regards, USPI Executive Committee 

Stichting USPI-NL

3817CH , Amersfoort The Netherlands 

E-mail:stichting@uspi.nl

Read more News

Our members

FL3DMS

The Standard

FL3DMS defines practical requirements for creating, delivering and maintaining trusted operational 3D environments across the asset lifecycle.

Business Value

Poorly standardised and underused 3D models may contribute to losses of 0.8–2.3% of Total Cost of Ownership across OPEX and CAPEX.

Implementation

FL3DMS supports scopes of work, contracts, vendor requirements, quality checks and structured handover across project phases.

Industry Alignment

FL3DMS complements CFIHOS, DEXPI and CII AWP by providing consistent spatial context for engineering, construction and operations.

Learn more about the USPI Key Roles

Platform Function

We bring members and industry partners together to share challenges, developments and practical experience. Through collaboration, USPI connects organisations across sectors, disciplines and international networks.

Strategy and Vision

We help shape a shared direction for lifecycle information management. USPI identifies common industry needs and supports the development of practical, internationally aligned approaches.

Framework Implementation

We turn industry requirements into practical frameworks, methods and implementation guidance. USPI also encourages pilot projects and supports alignment between organisations, projects and software solutions.

Knowledge center

We promote knowledge exchange through workshops, technical sessions, publications and collaborative projects. These activities help organisations strengthen their information-management capabilities and learn from industry experience.

International Standards

We contribute to the development, maintenance and improvement of international standards. By bringing industry expertise into standardisation, USPI helps ensure that standards remain relevant, practical and implementable.

USPI Newsletter